Wolf Tooth 110BCD Chainring

Wolf Tooth was first to market with Cyclocross 1x specific chainrings because Wolf Tooth saw Cyclocross as the perfect use for Wolf Tooth's Drop-Stop technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings.

Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.

Features

• These rings are for use with 110 BCD 5 arm cranksets
• Stock 2x bolts will not work - 6mm bolts optimised for single ring mounting are required
• Chainline: varies - these rings can be mounted in either the big or small ring position on double cranksets
• The most common mounting is in the big ring position due to chainstay clearance
• The ring centerline is approximately 2mm from the ring's mounting face, so they usually sit about 2mm closer to the frame than the stock big ring (Depending on the stock ring)

Specification

• Chain Compatibility: All 9s, 10s, and 11-Speed Chains. 12-Speed Chains:cConnex, Wipperman, Campagnolo, SRAM Eagle, SRAM Road and Transmission (T-type) Flattop chains. Not compatible with 12-Speed Shimano HG+, 12-Speed KMC, or 13-Speed Campagnolo chains