Peaty's Monarch Grip Lock Ring
| Brand | Peatys |
|---|
Our replacement monarch grip lockrings are available in twelve anodised colour options, are made from 6061 aluminium and come with preinstalled 3mm stainless steel allen keys bolts. Torque bolts to a maximum of 3nm.
Features
- Two lockrings with 3mm allen key bolts
- Slimline 8mm wide clamp to maximise grip area
- 6061 aluminium lock rings with stainless steel bolts
- Available in twelve colour options
- Left and right markings on each clamp
- Cardboard only backing board with paper locking wire
Fitting instructions
- Loosen 3mm allen key on lockring.
- Remove monarch grips from bars and pull off old lockrings.
- Re-fit new clamps, ensuring the correct side is fitted to the correct grip using the L & R markings engraved above the allen key.
- When fitted correctly, the flat edge of the lockring should touch the rubber of the grip and the allen key should face the rider.
- Re-fit grips, following our grip application steps.
- Ride!
