Crank Brothers Mallet E LS Pedals

The Crank Brothers Mallet E LS Pedals have been designed with Enduro in mind and have integrated feedback from top Enduro riders to create a pedal which performs at the highest level. The "LS" stands for "Long Spindle", with a 57mm axle rather than the standard 52mm. This longer spindle will give you a slightly wider Q-factor, which you might be used to if you have been using other Downhill purpose pedals. Other than alternate axle this is the same as the other Mallet E pedals.

Features:

• Concave pedal platform for secure foothold. Like it's DH equivalent you get that flat pedal feel whilst running clipless
• 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal
• Ribbed body allows for better traction when unclipped
• Chamfered edges for reduction in rock strikes
• Excellent mud-shedding: the design is very open
• 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal
• Increased float: 6° of side-to-side rotational play
• Fit adjustment: can be adjusted for either 15° or 20° release angle
• Zero-float cleats can be purchased separately
• Outer enduro cartridge bearing is designed specifically for pedals
• Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal

Spec:

• Weight (per pair) - 424g
• Spindle - 57mm - 435 chromoly steel
• Body - 6061-T6 aluminium
• Wings - 17-4PH stainless Spring - 300 series stainless steel
• Inner bearing - Igus LL-glide bearing
• Outer bearing - Enduro cartridge bearing
• Pins - 12 pins per pedal
• Cleats - Premium brass cleats included
• Release angle - 15° or 20°