Assos Equipe RS Le Houdini S11 Speedsuit
- In stock On the shelf in our own warehouse. Order before 2pm and it is despatched the same working day; bikes we build are built, safety-checked and despatched in 2-3 working days.
- In stock with our supplier Not on our shelves, but our supplier has it or it is already on its way to us. We bring it in as soon as you order, and the despatch estimate shown allows for that.
- Out of stock Neither we nor our supplier has it right now. Where a date is shown, more is on order and you can order now to secure one from that delivery.
- Stock to be confirmed Not on our shelves, and our supplier does not send us stock figures for it, so we cannot say how soon we could get one.
Attributes
| Colour | Fanatic Silver |
|---|---|
| Suitable for | Everyone |
About Assos
At the Assos Competence Centre in Ticino, Switzerland, members of the R&D Laboratory share over 350 years of expertise in cycling apparel. Assos use performance-oriented fabrics to construct highly technical garments that are made for true cycling.
Details
The ultimate road racing speedsuit, refined with lower weight, increased aerodynamics, and a subtle gradient fade of the Assos griffe.
Engineered in collaboration with Tudor Pro Cycling and the Swiss Cycling Federation, the S11 generation of the LE HOUDINI Roadsuit is lighter, more breathable, and more aerodynamic than its predecessors - critical properties for racing and training in hot conditions. The butterfly-wrap S11 pattern creates gains in compression and stability while simultaneously increasing comfort - especially in aggressive riding positions. The S11 Insert follows the same theme of increased comfort, incorporating the frictionless goldenGate 2.0 construction with an ultrasoft, antimicrobial top sheet and 360-degree cooling airflow. A full-length front zipper adds convenience to comfort, facilitating natural breaks.
Technology
Featured Fabrics
The jersey portion's Hill Rombo is a lightweight, breathable textile with proven aerodynamic gains in the wind tunnel. On the sleeves, 550CX provides similar drag reduction with a breathable and highly elastic second-skin fit. Type.911 is the same textile on the Equipe RS S11 bib shorts, employed here for silky-smooth compression and abrasion-resistance on the shorts section. It also dries quickly, preventing weight gained through lingering moisture, and it's equipped with UPF 50+ protection and odorControl.
Construction/Fit
Assos' most aggressive, most aerodynamic equipment. The legs are cut longer than Assos' typical racingFit design, and the zeroNeck construction is more open than Assos' standard RS Jerseys, allowing easier breathing during high-intensity efforts.
Engineering
Radio Pocket: Radio storage and internal cable routing maintain clean aerodynamics.
Soft compression Module: Provides muscle-enveloping, omnidirectional compression and stability with a waist construction that eliminates restriction in aggressive riding positions.
Bonded + Raw Cut: Bonded seams and raw-cut legs eliminate bulk and reduce drag and irritation.
SkinGrip Finish: Anti-slip finishing secures the legs in place without excessive pressure.
RS S11 Insert
Shock-Absorb Damping System Mono: Compressive foam materials in a single-layer 9mm racing platform that minimizes volume and weight. Thermoformed shaping eliminates ridges and irritation.
3D Waffle: A patented, three-layer, perforated foam that increases breathability and eliminates excess weight.
KraterCooler: Perforations in the inserts' leading edge draw intercooling air to maintain breathability and a dry, cool microclimate.
GoldenGate 2.0: The insert is attached at front and rear with floating sides and centre, letting it move with your body rather than against it. New cut-outs on the sides reduce volume and friction throughout the pedal stroke. Mineral Tec Surface: A soft, ultrasmooth coversheet that reduces friction and irritation while promoting comfort with quick-drying properties and permanent odorControl. whirlKrater: Perforations strategically distributed throughout the insert, creating a whirlwind of cooling airflow instead of just a unidirectional breeze.
Specification
- Composition: Legs 80%Polyamide 20%Elastane; Front Panel 90%Polyester 10%Elastane; Sleeve 80%Polyester 20%Elastane; Pocket Ramp 94%Polyamide 6%Elastan; Pocket 76%Polyamide 24%Elastane; Back Insert 100%Polyester; Pocket Insert, Padding Insert 85%Polyester 15%Elastane
- Temperature: +21°C
- Insert: 9mm
- Leg Length: Long
- Fit: Racing
- Riding Conditions: Warm
- Sustainability: OEKO-TEX Textiles / PFAS Free

All Bikes




All Components




All Clothing







All Protection


All Accessories









All Workshop






All Outdoors


All Nutrition & Training















































































































































































































