We're open online and delivering. See latest COVID-19 info here >

Cove Hummer 27.5-Inch XO1 Build Kit

£827.50 RRP £1,655.00
Save 50%
In Stock - Despatched In 1-2 days
PRODUCT CODE: RGY7848
More Information
BrandCove
ColourAll Black
In 1981, Chaz Romalis had a little shop in Deep Cove, North Vancouver. After years of North Shore testing & riding, Cove Bikes emerged to release the World’s first North Shore freeride bike in 1992. Cove Bikes is an integral part of North Shore riding.
Cove Hummer 27.5-Inch XO1 Build Kit

This is the build kit featured on the Cove Hummer hardtail. However if your specifications match, you can build this kit onto any suitable frame - Just make sure you check compatibility with everything, and then check some more. Then before you order, check again!

These kits are excellent value - They work out hundreds of pounds cheaper than if you were to buy the components separately.

Here are some standard measurements your frame will need in order to be fully compatible with this kit:

  • 27.5-Inch Wheel Compatible
  • 140mm Fork Tolerance
  • 12 x 142mm Rear Dropout
  • Headtube with 44mm Inner Diameter Press-Fit Cups
  • 68-73mm Wide Threaded Bottom Bracket Shell
  • 31.6mm Inner Diameter Seattube

Wheels:
SRAM Roam 50 Front & Rear
27.5" Diameter, 25mm Wide Rims
15x100mm [F] / 12x142mm [R] Axle Spacing
24-Spoke, 3-Cross Lacing with Bladed Spokes
6 Bolt Rotor Fitment
SRAM XD Driver
Tubeless Ready - Valves & Tape Included

Tyres:
Maxxis Ardent EXO - Tubeless Ready
27.5 x 2.25" Front & Rear
65psi Rating

Fork:
Rockshox Revelation RCT3 27.5"
Solo Air 140mm Travel
Tapered Alloy Steerer 265mm
15 x 100mm Maxle
Fast Black Stanchion
Motion Control 3-Point Lockout
External Rebound & Compression Adjust
160mm Post Brake Mount

Transmission:
SRAM XO1 11-Speed Cassette for XD Driver - 10/42T Range
SRAM XO1 11-Speed Derailleur - Medium Cage
SRAM XO1 11-Speed RH Shifter with MMX Compatible Clamp
SRAM 11-Speed PC1170 Chain
Full Length Inner Gear Cable Included

Brakes:
Avid XO Trail Complete Hydraulic Brakes Front & Rear
Alloy Caliper & Master Cylinder with Carbon Lever
Pad Contact and Lever Reach Adjustment
MMX Clamp System
Rubber Hoses
Avid HS1 180mm Rotors Front & Rear
IS to PM / PM to PM adapters included

Seatpost:
Rockshox Reverb, External Hose
31.6mm Diameter
125mm Travel, 420mm Lower
Left Hand (Above) Remote with Speed Adjust

Handlebar:
Raceface Turbine Alloy
31.8mm Clamp
725mm Wide, 20mm Rise
Laser Etched for Precision Cutdowns

Stem:
Raceface Turbine Alloy
31.8mm Bar Clamp, 1-1/8" Steerer Clamp
60mm Reach
+/-6 Degree rise

Crankset:
Raceface Turbine Alloy
175mm Arms
32T Narrow/Wide Ring with Alloy Guard

Bottom Bracket:
Raceface Turbine X-Type
68-73mm Threaded

Headset:
FSA Zero Stack Press-Fit
44mm Diameter 1-1/8" Bearing Upper Integral Cup
44mm Diameter 1.5" Bearing Lower External Cup
Star Nut & Top Cap Included

Grips:
Lizard Skins Charger Lock-On with Cove Alloy Clamps
125mm Length Including Clamps

Saddle:
WTB Rocket-V with Cove Print
Medium Padding
Chromoly Steel Rails

Please note: This build kit excludes the following components required to make a complete bike: Frame, Rear Shock (where applicable) Outer Gear Cable, Seatclamp, Pedals, Chainstay Protector, Innertubes / Tyre Sealant.

Some components displayed in the image may differ very slightly aesthetically from those included in the build kit.

If there happens to be anything we've missed and you need to know it, just give us a call.

More from this brand