Marin Alpine Trail E2 2022 Electric Bike

The Alpine Trail E will take you further, faster, allowing you to tackle the most aggressive trails either up or down.

Technologies

• Series 4 Aluminum Frame: Alpine Trail E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks.
• Multitrac Suspension: The Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system. With this combination there is no need for platform or lockout levers, just get on and blast up the hills.
• Mixed Wheel Sizes: 29" front and 27.5"+ rear wheel sizes are the ideal combination for the Alpine Trail E, with larger front wheel easily rolling over most any trail obstacle and offering the best cornering traction, while the burly 27.5 x 2.8" rear setup adds playfulness and enhances acceleration and braking traction.
• Dropper Post Optimized: The modern day trail rider needs their saddle out of the way at times, while low-slung frames require longer length posts. On the Alpine Trail E, seat tube lengths have been minimized, along with minimum insertion depths, so that riders of all sizes can get the proper extension needed.

Specifications

Frame and Forks

• Frame: All New Series 4 Alloy Frame, 150mm Multitrac Suspension, Integrated Battery/On-Switch/Charging Port, 148mm Rear Thru-Axle, Built-In Rear Speed Sensor
• Forks: Fox 38 Performance Elite, 160mm Travel, 29" , 110 x 15mm Boost Kabolt Thru-Axle, 44mm Offset, Integrated Fox Fender
• Headset: FSA No 57, Semi-Sealed Cartridge Bearings, 1-1/8" x 1-1/2"
• Rear Shock: Fox Float DHX2, Performance Elite, Low Speed Compression and Rebound Adjustment, 205 x 65mm, Trunnion Upper Mount, 25mm x M8 Lower Mount, Small / Medium Spring = 350lb, Large / X-Large Spring = 450lb

Drivetrain

• Crankset: E13 E*Spec Plus Crank, 165mm Length with E13 E*Spec DM Chainring 38 Tooth, E13 Plus Chainguide, Aluminum Plate
• Rear Derailleur: Shimano XT 8100 12-Speed, SGS
• Cassette: Shimano SLX M7100, 12-Speed, 10-51 Tooth
• Chain: KMC E12S, E-Bike Specific Chain

Braking / Shifting

• Shifters: Shimano SLX 7100 12-Speed, I-Spec EV
• Front Brake: Shimano SLX 4-Piston Hydraulic Disc, 203mm Rotor
• Rear Brake: Shimano SLX 4-Piston Hydraulic Disc, 203mm Rotor withSpeed Sensor
• Brake Levers: Shimano SLX Levers, I-Spec EV

Wheels

• Rims: Front: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width; Rear: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width; Pinned Joint, Disc Specific, Tubeless Compatible
• Front Hub: Forged Alloy, 110 x 15mm Axle Spacing, Centerlock Disc, 32 Hole
• Rear Hub: Shimano HB-MT510B, 148 x 12mm Axle Spacing, Centerlock, Microspline Freehub Body
• Axle: Bolt-On Thru-Axle
• Spokes: 14g Black Stainless Steel
• Tyres: Front: Vee Tire Co Attack HPL, 29x2.5", Top 40 Tubeless Compatible, Rear: Vee Tire Co Crown Gem, 27.5x2.8”, TACKEE Compound, Tubeless Compatible

Finishing Kit

• Handlebars: Deity Ridgeline, Stealth Finish, 35mm Clamp Size, 800mm Width
• Grips: Marin Single Clamp Locking
• Stem: Deity Copperhead 35mm, Black Ano
• Seatpost: X-Fusion Manic, Small 125mm Travel, Medium, Large 150mm Travel and X-Large 170mm Travel, 30.9mm Diameter
• Saddle: Marin E-MTB Saddle
• Pedals: Marin MTB Plastic

Electric Power

• Motor: Shimano STEPS EP8 Drive Unit, 250W, 85Nm
• Battery: BT-8036, Internal 630Wh
• Charger: Shimano EC-E6002, Bolt-On Thru-Axle
• Display: SC-E8000 Display
• Switch: SW-E7000 Left Hand Switch For Assist Mode Change